| Eigenschaft | Wert |
|---|---|
| Grade no. | |
| Grade name | |
| Format | flach |
| Thickness | 32 |
| Width | 34 |
| Secondary melting process | - |
| Diameter | - |
| Surface quality | gestrahlt |
| Heat treatment | ausscheidungsgehärtet (+P) |
Properties
1.4542 / 17-4 PH is a precipitation hardenable corrosion resistant martensitic steel with high yield strength, high wear resistance and corrosion resistance (PREN >15) under mild acidic conditions.
Even available as remelted variant (VAR or ESR) for highest homogeneity and cleanliness requirements.
Delivery Condition
- solution annealed (+AT)
- solution annealed, precipitation hard. (+P)
Application Area
High mechanical loads (stress and wear) at low and elevated temperatures in corrosive environment.
Typical Applications
- Nonwovens industry
- Technical textiles
- Chemical and petrochemical industry
- Aerospace
- Turbine blades
- Sensors and weighing technology
- Surgical instruments
| Eigenschaft | Wert |
|---|---|
| Grade name | |
| Grade no. | |
| Heat treatment | vergütet (+QT) |
| Format | flach |
| Diameter | - |
| Surface quality | gestrahlt |
| Thickness | 30 |
| Width | 40 |
Properties
Stainless martensitic chromium-nickel-steel with high strength and good toughness. High-gloss polishable. Good corrosion resistance (PREN≈19).
The formation of chromium-depleted areas by improper heat treatment increases the risk for intercrystalline corrosion.
Delivery Condition
- quenched and tempered (+QT)
- quench., tempered, stress relieved (+QT +SR)
- annealed (+A) max. 295 HBW
Application Area
Parts for high mechanical loads in corrosive environment.
Standard material for highly stressed shafts, piston rods and valves in all applications.
Typical Applications
- General mechanical engineering and equipment construction
- Chemical and petrochemical industry
- Nonwovens industry, technical textiles
- Surgical instruments
- Water and wastewater treatment
- Oil and gas industry
| Eigenschaft | Wert |
|---|---|
| Grade no. | |
| Grade name | |
| Format | flach |
| Secondary melting process | - |
| Diameter | - |
| Surface quality | gestrahlt |
| Heat treatment | ausscheidungsgehärtet (+P) |
| Thickness | 29 |
| Width | 42 |
Properties
1.4542 / 17-4 PH is a precipitation hardenable corrosion resistant martensitic steel with high yield strength, high wear resistance and corrosion resistance (PREN >15) under mild acidic conditions.
Even available as remelted variant (VAR or ESR) for highest homogeneity and cleanliness requirements.
Delivery Condition
- solution annealed (+AT)
- solution annealed, precipitation hard. (+P)
Application Area
High mechanical loads (stress and wear) at low and elevated temperatures in corrosive environment.
Typical Applications
- Nonwovens industry
- Technical textiles
- Chemical and petrochemical industry
- Aerospace
- Turbine blades
- Sensors and weighing technology
- Surgical instruments
| Eigenschaft | Wert |
|---|---|
| Grade name | |
| Grade no. | |
| Heat treatment | vergütet (+QT) |
| Format | flach |
| Diameter | - |
| Surface quality | gestrahlt |
| Thickness | 25 |
| Width | 60 |
Properties
Stainless martensitic chromium-nickel-steel with high strength and good toughness. High-gloss polishable. Good corrosion resistance (PREN≈19).
The formation of chromium-depleted areas by improper heat treatment increases the risk for intercrystalline corrosion.
Delivery Condition
- quenched and tempered (+QT)
- quench., tempered, stress relieved (+QT +SR)
- annealed (+A) max. 295 HBW
Application Area
Parts for high mechanical loads in corrosive environment.
Standard material for highly stressed shafts, piston rods and valves in all applications.
Typical Applications
- General mechanical engineering and equipment construction
- Chemical and petrochemical industry
- Nonwovens industry, technical textiles
- Surgical instruments
- Water and wastewater treatment
- Oil and gas industry